Toyota Celica Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
364 Posts
It'll fit in the space, BUT

You may find that:
  • the mounting holes for engine mounts, etc are in the wrong place requiring custom mounts
  • your pan doesn't fit
  • injectors area not matched requiring a custom ecu.

You might be better off getting a 89-93 used and doing your own rebuild or sending it to machine shop for a rebuild.

Sent from my Pixel 5 using Tapatalk
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
It'll fit in the space, BUT

You may find that:
  • the mounting holes for engine mounts, etc are in the wrong place requiring custom mounts
  • your pan doesn't fit
  • injectors area not matched requiring a custom ecu.

You might be better off getting a 89-93 used and doing your own rebuild or sending it to machine shop for a rebuild.

Sent from my Pixel 5 using Tapatalk
Thanks for the info. Ill look into finding used 89-93 celica one
 

·
Registered
Joined
·
12 Posts
Engines from Camry's can have different intake manifolds and are tuned differently (less power) along with the other for mentioned problems. It's easiest to get one from a Celica gt. Secondly as much as I'm a toyota fan boy I must say bottom ends on the 7a-fe and 5s-fe like to go out every 200-250k so a rebuild is in order if you buy a higher mileage motor. Best of luck.
 

·
Registered
Joined
·
4 Posts
1 - 6 of 6 Posts
Top