Toyota Celica Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Trying to restore 1992 Celica GT and having issues w/ Fuel pump ground wire. Bypassed w/ flathead on the fuel pump and started then died when released from contact-Any help would be appreciated
Thanks in Advance
 

·
Registered
Joined
·
364 Posts
You'll have to trace the wire back to a connector or ground point. Then use a meter to to check if there is continuity at both ends.

Sent from my Pixel 5 using Tapatalk
 

·
Registered
Joined
·
4 Posts
Trying to restore 1992 Celica GT and having issues w/ Fuel pump ground wire. Bypassed w/ flathead on the fuel pump and started then died when released from contact-Any help would be appreciated
Thanks in Advance
The ground wire runs back to a earthing block on the a pillar, from memory its white with a black stripe, there's a connector with about 6 wires on it
 
1 - 3 of 3 Posts
Top