Toyota Celica Forum

Toyota Celica Forum (https://www.toyotacelicas.com/forums/)
-   Second Generation (https://www.toyotacelicas.com/forums/91-second-generation/)
-   -   Hard To Find (https://www.toyotacelicas.com/forums/91-second-generation/25605-hard-find.html)

CelicaFan 09-10-2002 10:30 PM

Please read this first:
As we all know, finding parts and accessories for your Celica can be difficult, to say the least. Listed in this pinned topic are those parts, accessories, mods, etc. that we have been able to track down...
If you are looking for something you don't see listed here, please ask in the Wanted forum.




ToyotaTom 09-12-2005 06:31 AM

Looking for right tail light for my '78 Celica GT..................

darkslasher 09-20-2006 10:32 PM

if you find two tell me i need one for my 78 also

konzz 03-30-2007 04:31 PM

I have heard in the past that there is a later model celica/supra spindle that will bolt up to my 81'. I would like to do it if it's possible, I want the bigger disc brakes and the 5 bolt lug pattern. Anyone know what year and specific model will adapt?

thatdoodle 04-17-2008 05:33 PM

Hi All. I have a complete set of oem mudflaps that came off of a 80-81. Here they are.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...E:IT&ih=006

I got them from a celica that was in the salvage yard. If anyone is near the PA pocono region the car is at " Harry's U Pull it" in west hazleton Pa. It was a shame to see it sitting there in such great shape. The car was pretty clean besides some rust on the driver's side rocker. There are a lot of parts. The interior was complete and the exterior was only missing the grill. I couldnt help but to take the mudguards. They looked so good. lol

whgaunt 07-09-2008 10:01 AM

QUOTE (thatdoodle @ Apr 17 2008, 05:33 PM)
Quote:

Hi All. I have a complete set of oem mudflaps that came off of a 80-81. Here they are.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...E:IT&ih=006

I got them from a celica that was in the salvage yard. If anyone is near the PA pocono region the car is at " Harry's U Pull it" in west hazleton Pa. It was a shame to see it sitting there in such great shape. The car was pretty clean besides some rust on the driver's side rocker. There are a lot of parts. The interior was complete and the exterior was only missing the grill. I couldnt help but to take the mudguards. They looked so good. lol[/B]
What can you tell me about the Celica that was/is at Harry's? What is left on it, I have an 80 GT lift back and would love to get any parts that I can.

Bucketbrain 08-06-2008 04:47 PM

Hi fellow Toyota lovers,

A few years ago, I ditched my beloved 1979 Celica. It didn't get torn up too badly (I drove it for a while afterward) The passengers side door is pretty bad (could probably be straightened) and the passengers front fender is beyond repair. Other than that, the damage is minimal.

I've decided to part it out or sell it whole, since it will probably be a while before I can find the time and money to work on it.

It's got lots of good parts. It has less than 100,000 miles on it, and the engine and 5 speed transmission were in tip-top shape when it got ditched but, the engine hasn't been turned over in about 5 years. No frame or substructure damage but, one of the rear springs is collapsed.

If anyone is interested in parts or just buying the whole car... PM or Email me. I live in Boulder County, Colorado.

friendlydan 08-08-2008 03:42 PM

QUOTE (bucketbrain @ Aug 6 2008, 12:47 PM)
Quote:

Hi fellow Toyota lovers,

A few years ago, I ditched my beloved 1979 Celica. It didn't get torn up too badly (I drove it for a while afterward) The passengers side door is pretty bad (could probably be straightened) and the passengers front fender is beyond repair. Other than that, the damage is minimal.

I've decided to part it out or sell it whole, since it will probably be a while before I can find the time and money to work on it.

It's got lots of good parts. It has less than 100,000 miles on it, and the engine and 5 speed transmission were in tip-top shape when it got ditched but, the engine hasn't been turned over in about 5 years. No frame or substructure damage but, one of the rear springs is collapsed.

If anyone is interested in parts or just buying the whole car... PM or Email me. I live in Boulder County, Colorado.[/B]
I am a way from you, but by chance do you have the original alloy wheels in good shape? thanks D. Friend

wyograd04 04-16-2009 12:24 AM

QUOTE (konzz @ Mar 30 2007, 01:31 PM)
Quote:

I have heard in the past that there is a later model celica/supra spindle that will bolt up to my 81'. I would like to do it if it's possible, I want the bigger disc brakes and the 5 bolt lug pattern. Anyone know what year and specific model will adapt?[/B]
Did anyone get back to you on the bolt up? Also what would you use to swap the rear axel to the 5 lug? I just got an 80 and am having a hard time finding any upgrades.

oldschool 04-27-2009 03:45 PM

Looking for the belt molding (top of doors) for a 1980 Celica ST. Any info, please e-mail me.


All times are GMT -4. The time now is 10:29 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome