7th gen evap lines

[Jasonhughes2009]

anyone know what size tubings they are?

got a leak and they all seem pretty rotted so im just replacing them all, and since all toyota will do is send me a hose that id have to cut myself anyways, i figure ill go get the same hose somewhere cheaper. just need to know the hose size, going to pick up about 25 feet of it

p.s. dropping the fuel tank on this thing is by far the most annoying job ive ever done on a vehicle, who the **** decides to route an exhaust DIRECTLY under and between the fuel tank...

[Jasonhughes2009]

did not realize how many evap lines there were... ended up using vacuum tubing for most of them and the larger line i found some hose of the same size at home depot

that was obnoxious though, and did not fix the problem

got a new charcoal canister, vsv, and purge solenoid for 80 bucks (since both of them ended up throwing codes after i replaced the lines) and i bench smoke tested the old canister and that was leaking from the seams

[2000celicagtmg]

Originally Posted by Jasonhughes2009

p.s. dropping the fuel tank on this thing is by far the most annoying job ive ever done on a vehicle, who the **** decides to route an exhaust DIRECTLY under and between the fuel tank...

Toyota does !!!! you have a few choices on your other question, either go out to your Celica and measure the inside diameter of the hose in question, go to a dealer and ask them or give me your car..... seriously... measuring would be the best choice, no errors that way, ebay sells blue silicone vac lines for our cars, that would look nice !!!!

[2000celicagtmg]

blue silicone vacuum lines | eBay

[Jasonhughes2009]

got all the lines done a few days ago and the new canister in last night

as for the blue sillicone.... im completely colorblind, so probably wouldnt look as good to me as it does to everyone else