XENON HIDs!!! HELP!!!

[does2]

whats going on my fellow celica drivers!

my HID right headlight finally went out on my 2003 celica
what sucks is i cant remember what brand HID i went with or if that even matters...
anyways i hear people say all the time that installing xenon HIDs is easy and any dummy can do it so im thinking of installing them myself
what i need answers from you guys is where can i find detailed instructions on how to install from step A: taking off the headlight to step Z: how to put the headlight back on without screwing anything up of course :]

thanks in advanced fellas and i look forward to being a part of this community
Peace!

[Linden]

before you go changing them, make sure all the wires going into/out of the ballast are connected. When one of mine went it turned out to just be a loose wire.
If one of your bulbs or ballasts does need to be replaced, the brand doesn't matter (I have two different ones), as long as they're the same brightness/strength (6000k, 8000k, 10000k, etc)
if you need to actually remove your headlight assembly, it involves removing your bumper. not real tricky, but time consuming.

[marcusher]

You DO NOT have to remove the bumper, i laugh at anyone who took off their bumper to change a headlight assembly.

FIO... be creative.

[Linden]

Originally Posted by marcusher

You DO NOT have to remove the bumper, i laugh at anyone who took off their bumper to change a headlight assembly.

FIO... be creative.

Have you actually changed your assembly? If so, please, enlighten us.

[marcusher]

yeeeup, just un screw the headlight assembly bolts and keep fiddling with it till it comes out.
i slid it back then pushed down and it came right out

[does2]

thanks for the insight guys
i got a pair of xenon h7 6000k bulbs today because i found out it was just the bulb and not the ballast.
new problem is i cant find any screws to unscrew under the hood behind the headlight (i'll post pics tomorrow).
Also where is the best place to get new fog lights for the bumper???

[marcusher]

10mm screws, one on the top, one in the front fender hole and one inside the front bumper, have to take off the splash guar (black thing) round the wheel