My 1991 Celica Build.. - Page 2 - Toyota Celicas

Possumface · 02-15-2013, 07:41 AM

Any websites or company's that you guys recommend?
I maynot go with the turbo I get from the kit but if I get the kit for a good price and buy a good turbo I may do that

hikarucelica · 02-15-2013, 05:57 PM

turbos would be greddy, garrett, blitz. those are good turbo companys or get a DSM turbo since we can run their injectors with the resistor box.

msecrets · 02-17-2013, 06:15 PM

that looks like the bvsv on my 91 gts 5sfe. The bimetal vacuum switching valve, if i remember correctly. They break very easily due to being brittle. I got one from a wrecking yard and it broke on installation. So, instead of paying an arm and a leg for an OEM part from the Toyota dealership, I just superglued it and left it at that. So far so good

Possumface · 02-18-2013, 12:52 AM

well the piece of plastic is complely gone when I got the car and paying 50-60 bucks for one is just stupid, i may have to try that super glue or duck tape lol

Possumface · 02-18-2013, 01:29 AM

can anyone tell me how to find these rims? they were some alloys off my 1990 stx, i cant seem to find a set of them anywhere. btw they are alloy not black i sprayed them with black paint haha

Possumface · 02-19-2013, 11:35 AM

OBX Performance Exhaust Manifold Header Fit for 1993 1997 Corolla DX 1 6L 4AFE | eBay
would these fit my 4AFE motor?

mrlieu · 02-19-2013, 12:28 PM

they will fit but the down pipe is not long enough to bolt up to the rest of the exhaust. I know because I bought the same ones and I'm getting them fitted soon

grassdragger738 · 02-19-2013, 01:03 PM

If it doesnt fit modify your exhaust so it will

hikarucelica · 02-19-2013, 02:56 PM

Quote:

Originally Posted by Possumface

can anyone tell me how to find these rims? they were some alloys off my 1990 stx, i cant seem to find a set of them anywhere. btw they are alloy not black i sprayed them with black paint haha

those look like ROTA slipstreams

http://hondamarketplace.com/attachme...1&d=1239291273

Possumface · 02-20-2013, 07:44 AM

So my best bet would be letting a exhaust shop do it? Ive never actually welded so I dont wanna mess it up..but i also see 2 o2 bugs but mine only has one i believe, could I plug it?

and those ROTA rims look very simular but there not the same i dont think. They were stock alloys so i was told back then but I could be wrong.

02-19-2013, 01:03 PM	#18 (permalink)
grassdragger738 Guru Join Date: Jul 2011 Posts: 169	Re: My 1991 Celica Build.. If it doesnt fit modify your exhaust so it will

02-15-2013, 05:57 PM	#12 (permalink)
hikarucelica Fanatic Join Date: Aug 2012 Location: wisconsin Posts: 70	turbos would be greddy, garrett, blitz. those are good turbo companys or get a DSM turbo since we can run their injectors with the resistor box.

02-17-2013, 06:15 PM	#13 (permalink)
msecrets Member Join Date: Dec 2011 Posts: 8	that looks like the bvsv on my 91 gts 5sfe. The bimetal vacuum switching valve, if i remember correctly. They break very easily due to being brittle. I got one from a wrecking yard and it broke on installation. So, instead of paying an arm and a leg for an OEM part from the Toyota dealership, I just superglued it and left it at that. So far so good

Remove Advertisements Sponsored Links
Toyota Celicas Forum Advertisement