![]() |
|
![]() |
|
![]() |
![]() |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Member
Join Date: Dec 2010
Posts: 17
|
Hey guys. Got a problem here.
About a year ago I pulled out of my driveway one day and noticed a "clunking" noise coming from under my passenger floorboard. Happens when the front suspension flexes (going over a bump, pulling in the driveway at an angle, hitting a pothole). I've done a lot of research and I think it may be my sway bar bushings. I've seen a lot of people that had issues with them, but I was curious if you guys could set me straight. Do you think it's my sway bar? If so is it mainly just the bushings that go bad? Could I replace them easily? I've also read that some people just completely eliminate their sway bar. What are your thoughts? I appreciate any help. Thanks! -Cody |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 (permalink) |
|
Guru
|
Could also be a bent control arm, worn out cv axle, or worn out wheel bearing, I would check underneath the car and look for obvious signs of damage before you rule out the bushings, If you are gonna buy some bushings go with some polyurethane ones, you never have to replace them again.
__________________
4A-FE Inside ![]() |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|