Fog Light Issue

[blahxnhim]

I just installed a HID kit, and my fogs aren't working. Bulbs and fuses are fine. I looked around see what it may be, turns out its the third prong on the stock headlights that connects to the fogs.. Right? I wanna re-wire the fogs so it can turn on with my corners and not blink while signaling and without the aid of the headlights. Can anyone help?

[123crazy]

i had same issue.. i bridge the high beams to the lowbeams. with a after market quarter light. so now when i turn my high beams the fogs turn off. and the quarter light lights up inside the hood. i turn the high beams off. and fogs turn back on

[teamyeahson]

I also had this problem, I just got the high and low beams then and it works perfect. I would highly recommend that you just get the high and low because then it also goes to the battery and it is brighter

[123crazy]

yea bixenon kit is better than cutting and re wireing everything.. hahaha

[blahxnhim]

Alright folks, I tried this out today and it was a piece of cake.

Toyota Celica Online: Foglight rewire

It was more simple than I thought it would be. But my fogs seem dimmer than normal. It's more of a yellow / gold light rather than a bright white like how it was before I installed the HID. Are the wires I used not pushing enough energy? Or did I miss something?

[teamyeahson]

I had the same problem, Its because there is not enough power going to them. The good kind have a wire going to the power

[blahxnhim]

Originally Posted by teamyeahson

I had the same problem, Its because there is not enough power going to them. The good kind have a wire going to the power

What did you do to get more power going to them?

[teamyeahson]

bought new HIDs that were high and low haha, they came with a wire to go to power

[123crazy]

just buy h3 hid kit. and get a relay for it. thats what i did

[91GT]

Thats y i havent tried that yet.. i knew something like that would happend, huummm guess i'll take it to my electrician