![]() |
|
![]() |
|
![]() |
![]() |
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
Member
Join Date: Aug 2012
Posts: 15
|
Hey guys!
I recently fitted a new headunit in my celica (PHILIPS CED1700) and now the antenna wont go up when i turn the car on doesnt anybody have any ideas what could be wrong with it? maybe i've wired it wrong or something, i'm not too sure :Scheers!
|
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#5 (permalink) |
|
Member
Join Date: Aug 2012
Posts: 15
|
Yeah it's a blue wire, but I'm not to sure if i have connected it to the right wire at the car..
Would anyone have an idea which wire from the celica i should connect to the blue wire of the headunit? Like which coloured wires operate the antenna an such? Cheers
|
|
|
|
|
|
#9 (permalink) |
|
Obsessed
Join Date: Jun 2008
Posts: 81
|
pull the antenna out of the car and take it apart. below the part that comes out of the car it is plastic or nylon with teeth that link up with the motor to raise and lower. That part usually breaks inside the motor housing. You can get a replacement antenna element either in the jy or on ebay for not too much $ if the motor still rotates OK. To replace it hook it back up to the car and pull the old antenna out after it is raised,note the position/direction of the teeth and feed the new one back in as it goes to lower it.
Last edited by gvtrains; 08-22-2012 at 01:56 PM. |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|