New member; 76 Celica GT - Toyota Celica Forum
User Tag List

 
LinkBack Thread Tools
post #1 of 1 (permalink) Old 02-15-2017, 01:58 AM Thread Starter
Member
 
Join Date: Feb 2017
Location: Tempe, Arizona
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
(Thread Starter)
Talking New member; 76 Celica GT

Hi guys,
Just joined, I've got a pretty heavily modded '76 Celica GT!

Build List:
Engine/ Ignition/ Fuel
  • 20R 2.2L (30 thousandths overbore), 2190cc, 8:4:1 compression, aluminum head/block
  • High performance dual valve springs by Toyhead
  • Aluminum racing rocker arm assembly with Drilled Shafts by Toyhead
  • FelPro head gasket
  • Upgraded bronze valve keepers by Toyhead
  • Hi*gh performance bronze valve guides by Toyhead
  • New valve seals by Toyhead
  • Stainless steel oversize valves (intake 43mm x 8mm x 115.4mm, exhaust 43mm x 8mm x 115.4mm)
  • Toyhead Cam No. 801-282 (282', .5/.433 lift)
  • EGR blockoff by LCE
  • LCE Master Rebuild Kit
  • Long tube racing header by OBXr (4x1.5”:1x3”)
  • 2.5" performance exhaust with Dynomax muffler, catless from factory
  • MSD Streetfire ignition
  • Pertronix electronic point converter
  • Centerforce throw-out bearing and pilot bearing
  • Centerforce II clutch
  • Weber 38 DGES carb, tuned by Techno Classic USA
  • Aftermarket high flow fuel pump
  • Holley fuel regulator
  • Jeep high flow fuel filter(Used for return line to pump)
  • Full port and polish on head


Audio System
  • 4x 400W Rockford Fosgate punch amp
  • 2 5” Infinity speakers by Harmon Kardon
  • 2 6”x 9” Infinity speakers by Harmon Kardon
  • Rockford Fosgate Punch 225d amp mono bridged for subwoofers
  • 2x Pioneer 12.5” TS-W304C subwoofers
  • Custom built woofer box with two separated enclosures @ 1.2 cu ft each
  • All wiring/ fusing wire tucked and run under carpet
  • Alpine stereo deck
Suspension
  • Custom adjustable front control arms from Techno Toy Tuning
  • KYB AGX 4 level selectable dampers, front
  • QA1 82 series Aluminum Threaded Twin Tube Shocks, rear
  • QA1 coils springs (rate @ 8k/6k) (7ht350 & 7ht450)
  • Godspeed ae86 front sway (25.13mm)
  • Custom drop endlinks by Techno Classic
  • Custom milled 45mm RCAs by Techno Classic
  • Custom camber plates by Techno Classic
  • Custom milled perches and top hats by Techno Classic
  • QA1 CK8201 coil over kit for 82 series (Aluminum sleeve, Spring cap, Spring seat, adjuster nut, Wire ties, Spring cap retainer pin, Jam nut, Snap rings), assembled and modified by Techno Classic
  • Corner balanced by Techno Classic

Wheels/ Tires
  • 15x7.5” Gram Lights 57v by Rays Wheels
  • 205/50/15 Yokohama S Drive


Exterior
  • Custom fiberglass rear spoiler by Fauxau2
  • 1974 Smiley Bumpers, front and rear; re-chromed
  • Rolled fenders (all four)
  • All Celica insignias intact (steering wheel, rear side panels, trunk, original shift knob)
  • Original GT grille from 1976
  • JDM mirror
  • Original body panels & hood from 1976
  • New paint; originally green (as seen in the engine bay)

Interior
  • Fully restored seats and side panels
  • New carpeting and headliner
  • Original dash, center console, sail panels and steering wheel from 1976


Glad to be a part of one of the VERY few active forums for the first gens!
HMU with any questions or comments!
76_CelicaGT is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


Search Engine Friendly URLs by vBSEO 3.6.1